Operation specification of Grain processing machinery

Operation specification of grain processing machinery

    The development of the agricultural economy allows us to use more healthy and nutritious food, and the emergence of mechanization has brought a lot of convenience to our daily production, but Grain processing machinery is a large-scale equipment after all. If there is a mistake in daily production, it will Threatening people.

How to operate to realize the safe production of Grain processing machinery?

　　 1. When the Grain processing machine is started, the power should be switched on first, and then the fan should be tested and run to observe the direction of rotation. If there is a reversal, it should be corrected immediately.

　　2. When feeding the Grain processing machinery, the grain should be poured between the enclosing rack and the stacking rack.

　　3. During the operation, the temperature should be controlled by the different opening angles of the temperature adjustment plate. It should be horizontal when working stably. If the temperature is too low, it can be achieved by moving the distance between the furnace and the fan.

　　4. In order to make the Grain dry evenly, turn it every half an hour at the beginning, and turn it at intervals of 20-25 minutes when the drying is about to end.

　　 5. Based on experience and drying time, it is estimated that the grain is already dry and ready to be discharged. In order to facilitate the discharging, you can first lift the fence frame out and put it aside. The taken out grains can be moved to other places for other processing.

When the Grain processing machine is running, it will produce jitter phenomenon: when the machine vibrates, it should be distinguished whether it is caused by the poor transmission of the flour mill, caused by the motor of the Grain processing machine itself, or transmitted by the mechanical load end. Come over, and then rule out specific situations.