The harm caused by long-term overload operation of corn processing machinery

 After long-term use of corn machinery, the components will wear out due to the influence of various forces. Sometimes, some users will overload the corn machinery for some benefit.

So will this damage the early layers of the corn machinery?

In fact, equipment and people need rest. When the corn machine is working 24 hours a day, the sensitive parts will explode when the pressure continues to rise to a certain degree. At this time, it should be timely.

Cut off the transfer machine to prevent secondary damage, but even if the overload state is controlled, a good protection effect cannot be achieved.

If the corn machinery is always in an overloaded production state, it will cause the phenomenon of explosion. When corn with high moisture content enters the corn equipment, it is easy to cause jams, so avoid overproduction.

If things go on like this, it will cause a lot of damage to the equipment itself, and its service life will be greatly reduced.

Overloading of corn machinery will cause serious damage to the parts of the machine and irreversible injuries. In order to prolong the service life of the machine, the operator must strictly abide by the operating specifications and reasonable

Arrange working hours so that the quantity of corn equipment is within a tolerable range and avoid unnecessary losses. At the same time, pay attention to the maintenance of the machine in peacetime.