What are the common faults when corn flakes making machine is running?

Corn has high nutritional value, in the use of corn flakes making machine

In the process of processing, due to long-term use or improper operation, it is inevitable to encounter some problems. The following are some common problems and their reasons.

1. The screw mixer is faulty. The agitator shaft does not rotate because of excessive feeding and slippage of the transmission belt, etc. The grain outlet does not discharge grain because the motor is turned incorrectly, the outlet is blocked, and the blades of the agitator are cracked.

2. Because of the poor air closure, the dough bag can be sucked up. The common reasons are air leakage at the joints, wear of the impeller, etc. If the impeller is worn, a rubber plate can be installed on the outer edge.

3. Motor failure. The whole corn flakes making machine has more than 10 motors of different sizes. Therefore, the faults of the motors cannot be ignored, and the high temperature is one of the main reasons for the damage of the motors. The causes of excessive temperature include lack of oil in the bearing, entry of dirt into the bearing, damage to the bearing or overload of the motor.

Knowing this, if you encounter the above problems in the process of using corn flakes making machine, you can take corresponding measures to solve the failure as soon as possible. For more knowledge about corn processing equipment, you can continue to pay attention to our official website.