Too wet corn kernels can easily cause blockage during processing

Corn processing equipment is used by food processing plants to process corn kernels, which can be ground into powder. During the processing, the corn kernels may be too wet or the screens may be blocked by other reasons. At this time, the blockage should be targeted. Problems are dealt with to make the production of corn processing equipment smoother. So how to prevent the corn processing equipment from clogging.

In the long-term research and application process of the corn processing equipment vibration equipment, the effective principle of preventing the hole blocking method should be that the direction of the force to push out the particles is opposite to the direction of embedding, so that the screen surface will produce a second vibration, that is, the screen surface will be vertical at its own frequency. Vibration in the direction of the screen surface, the mechanism strives to be simple, not easy to be damaged, and does not require frequent maintenance. The method of vibrating round screen to prevent hole blocking is to produce a movement perpendicular to the direction of the screen surface through the eccentric structure, so that the particles fall off from the hole.

Corn processing equipment adopts many methods to prevent hole blocking, such as: installing a movable screen on the screen surface, tapping the screen surface to make the screen surface vibrate, installing a rotating cleaner, cleaning roller or a movable brush on the screen surface , Install a rotating rubber roller on the screen surface and hit with a rubber ball under the screen surface to increase the vertical acceleration of the screen surface.