What happens when the sieve body in the maize milling machine is biased?

maize milling machine is a device for processing corn. There are many links in the production process, and one of them is to sieve the corn particles, so that the impurities in the corn kernels can be removed, so that the maize milling machine can be more efficient. good job. However, in the process of maize milling machine, there will be a situation where the material deviates. What is the situation and how to solve it?

Through the analysis of the production process of maize milling machine, it is concluded that the problem of material deviation often occurs in the cleaning process. If it is not solved, the material will continue to deviate, then the material classification will be destroyed, and the cleaning effect will be reduced. Therefore, the staff is required to pay attention to it, and when an abnormal situation is found, it is necessary to stop the operation in time, and then find out the reason and solve it.

Among them, the material deviation of the maize milling machine may be caused by the uneven sieve body of the machine itself, which requires personnel to re-pad and level the rack for adjustment. It is also possible that the axial stiffness of the rubber spring is inconsistent and the amount of compression is different. At this time, the personnel need to replace the rubber spring selected by the afterburner, so that the compression amount is the same and leveled.

In addition, it was found that the movement trajectory of the screen body was incorrect. The personnel noticed that the excitation forces of the two motors were different, and adjusted the eccentric weight of one of them to make the two the same. If the resultant force of the excitation force of the two motors does not pass through the longitudinal symmetry plane of the screen body, loosen the U-shaped fastening bolts and adjust the position of the motor to make it symmetrical with the other one. The rubber spring is deformed and fails, replace it with a new spring.

The above is an analysis of the situation that the screen body is deviated during the production process of maize milling machine. It is hoped that when the screen body is deviated, the staff should work as required to avoid the deviation of the material.